中文

Bagging Film

Breather / Bleeder

Release Film

Peel Ply

Sealant Tape

Infusion Flow Media 

PSAT

Accessories

 

PEEL PLY FABRIC is a fabric used for preparing a composite surface, which is removed just prior to secondary bonding, or other consequent surface treatments such as painting etc.. By providing a consistent and reliable bonding surface without any additional chemical or mechanical treatment or process, the better bonding strength and less labour cost could be achieved. Of course actual bond strength depends not only on surface impression but also on other variables such as the adhesive, application method, and processing etc..

All-T produces a wide range of peel ply fabrics - Plain or twill woven Nylon 6 or Nylon 66 or Polyester fabrics, ( with or without tracing yarns) are dyed (optional), scoured, and heat set. No detectable silicone is permitted by the whole procedure. All products fall within a pH range of 4.0 to 8.0 and have maximum petroleum ether extractable of 0.5%.

The Nylon 66 Series peel ply fabrics, weight range from 50 to 110g/m2, can be easily removed from the composite part, and have excellent high temperature resistance and good tensile strength. These fabrics can be released from most of the traditional resin systems except for the Phenolic resin - for the Phenolic resin, please choose the Polyester Series.

 

Typical Properties of the Nylon 66 Series Peel Ply Fabrics

Item

Max. Serv.
Temp.

Weight

Width

Length

Thickness

Weave

Count
Warp/Fill

Colour

ATP50

200

50gr/m2

1.50 m

100m

0.10 mm

Plain

46/36

White

ATP50 GN

200

50gr/m2

1.50 m

100m

0.10mm

Plain

46/36

Green

ATP85

200

83gr/m2

1.80m

100/500mm

0.14mm

Plain

17/17

White/Tracer

ATP85 GN

200

83gr/m2

1.80m

100/500m

0.14mm

Plain

17/17

Green

ATP100

200

105gr/m2

1.60m

100/500m

0.18mm

Plain

20/25

White/Tracer

ATP100 GN

200

105gr/m2

1.60m

100/500m

0.18mm

Plain

20/25

White/Tracer

The Nylon 6 Series peel ply fabrics, weight range from 50 to 110g/m2, can be easily removed from the composite part, and have excellent high temperature resistance and good tensile strength. These fabrics can be released from most of the traditional resin systems except for the Phenolic resin - for the Phenolic resin, please choose the Polyester Series.

Typical Properties of the Nylon 6 Series Peel Ply Fabrics

Item

Max. Serv.
Temp.

Weight

Width

Length

Thickness

Weave

Count
Warp/Fill

Colour

ALP50

190

50gr/m2

1.50 m

100m

0.10 mm

Plain

46/36

White

ALP50 GN

190

50gr/m2

1.50 m

100m

0.10mm

Plain

46/36

Green

ALP85

190

83gr/m2

1.80m

100/500mm

0.14mm

Plain

17/17

White/Tracer

ALP85 GN

190

83gr/m2

1.80m

100/500m

0.14mm

Plain

17/17

Green

ALP100

190

105gr/m2

1.60m

100/500m

0.18mm

Plain

20/25

White/Tracer

ALP100 GN

190

105gr/m2

1.60m

100/500m

0.18mm

Plain

20/25

White/Tracer

 

Typical Properties of the Polyester Series Peel Ply Fabrics

Item

Max. Serv.
Temp.

Weight

Width

Length

Thickness

Weave

Count
Warp/Fill

Colour

APP85

190

83gr/m2

1.80m

100/500mm

0.14mm

Plain

17/17

White/Tracer

APP85 GN

190

83gr/m2

1.80m

100/500m

0.14mm

Plain

17/17

Green

APP100

190

105gr/m2

1.60m

100/500m

0.18mm

Plain

20/25

White/Tracer

APP100 GN

190

105gr/m2

1.60m

100/500m

0.18mm

Plain

20/25

White/Tracer

The data listed herein fall within the normal range of product properties for the products described, but they should not be used to establish specification limits nor used alone as the basis of design. All-T assumes no obligation or liability for any advice furnished by it or for results obtained with respect to these products. All such advice is provided gratis and Buyer assumes sole responsibility for results obtained in reliance thereon.

 

Reducing the composites fabrication cost with the Peel Ply and Vacuum Infusion Media Made In China  from All-T Composites o., Ltd.

View PDF File

Nylon 6,6, Peel Ply

Polyester Peel Ply

Nylon 6 Peel Ply